3D printing

Type of Content
November 19, 2018 | Source: TCT Magazine, tctmagazine.com, Sam Davies, 14 June 2018
Work has begun on a $1.4 million project under the Maturation of Advanced Manufacturing for Low-Cost Sustainment (MAMLS) program funded by the Air Force Research Laboratory (AFRL...
November 5, 2018 | Source: Purdue University News, purdue.edu, Jared Pike, 11 June 2018
It's now possible to 3D print extremely viscous materials, with the consistency of clay or cookie dough with fine precision, thanks to work done at Purdue University. This...
Nov 7 2018 - 11:00am | Source: America Makes
Dr. Nima Moazami will present GENOA 3DP’s design to print simulation solution, with a specific focus on visualizing defects and predicting warpage, bald spots, residual stresses...
3D printed throttleable pintle injector bolted to combustion chamber transition spool. (source: Rocketstar)
"The ability of this pintle to simply and efficiently inject a multitude of hypergolic fuels and throttle them from five percent all the way to full throttle is very exciting. It...
October 25, 2018 | Source: America Makes, americamakes.us
America Makes proudly announces its next Directed Project Opportunity made available today to its members for additive manufacturing (AM) applied research and development (R&D...
October 22, 2018 | Source: California Institute of Technology, caltech.edu, 15 May 2018, Robert Perkins
New robot concept uses responsive materials to swim through water. Engineers at Caltech and ETH Zurich have developed robots capable of self-propulsion without using any motors,...
Publication Date: 
9 October 2018
October 8, 2018 | Source: Harvard Paulson School, seas.harvard.edu, 28 Feb 2018, Leah Burrows
Researchers at Harvard University have built soft robots inspired by nature that can crawl, swim, grasp delicate objects and even assist a beating heart, but none of these devices...
August 20, 2018 | Source: engineering.com, 22 February 2018, Ian Wright
The four industrial revolutions: (1) Mechanization through water and steam power. (2) Mass production and assembly lines powered by electricity. (3) Computerization and automation...
August 2, 2018 | Source: Chemical & Engineering News, cen.acs.org, 11 May 2018, Stu Borman
Researchers have found a way to create industrially important thermoset polymer and fiber-reinforced polymer composite products at considerably lower expense than has been...